[ARC5] BC-1306 help needed

[Meir WF2U]

Refer to the manual. The connectors and pinouts are identical to the GRC-9, voltages are also identical. Here is where you can download the SCR-694 manual (the nomenclature for the whole system, in which the BC-1306 is a component): http://radionerds.com/index.php/SCR-694 manual .
I have an operational BC-1306, which I power up with the military 115 VAC power supply for the GRC-9. It works great on 80 M on CW, it is a bit underpowered on AM - around 6 to 8 W - under crowded or adverse band conditions. Incidentally, the -1306 puts out over 5 W more on CW  than the GRC-9  - around 22 W, I guess because it is a single band radio, vs. the 3 bands of the GRC-9 which covers a much wider frequency range.

Good luck,
73, Meir WF2U
Landrum, SC



On December 17, 2016 7:19:13 PM EST, w5sum at comcast.net wrote:
>Yep.. off topic for ARC-5 Group. Someone point me to a group or person
>that can help.
>
>I purchased a CLEAN BC-1306 at the Minden, La hamfest today. I need
>information on 
>building cables to hook it up. I do NOT intend to use the Vibrator
>supply or the hand crank supply with this little rig.
>
>thanks in advance y’all
>
>Ronnie W5SUM
>
>------------------------------------------------------------------------
>
>______________________________________________________________
>ARC5 mailing list
>Home: http://mailman.qth.net/mailman/listinfo/arc5
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:ARC5 at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20161217/3c634f08/attachment.html>