[ARC5] T-17 goes for big bucks!

[Chris Bowne]

Forgot to mention that the setup also includes two SCR-274 receivers and a three receiver control box, everything is interconnected so the receive audio (selectable to either the A or B channel) switches  over to the transmit voice side tone or the keyed tone on CW or MCW on transmit.  Although I have not done it in many years, the whole setup is contained in a two shelf box that can be hooked up to a 24v DC supply and an antenna for a live on the air demo.  I usually run it with a BC348 in place of the command set receivers.

Sent from my iPhone

> On Apr 24, 2016, at 9:35, "Todd, KA1KAQ" <ka1kaq at gmail.com> wrote:
> 
> And using the correct rack for the transmitters would let you bypass the 'fit' issues, of course, making it a matter of building a hybrid cable as you did. Very simple and effective. 
> 
>> On Sat, Apr 23, 2016 at 10:39 PM, Chris Bowne <aj1g at sbcglobal.net> wrote:
>> Outside of figuring out connector pin out differences between the SCR-274 and the ARC-5 transmitters, the only change I had to make to use the ARC-5s with the BC-466 screen modulator was to change the value of the ARC-5's 1625 screen dropping resistor to match the one used in the 274's.  Been running them that way for many years now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20160424/23f442e6/attachment-0001.html>