[ARC5] Questions for all

[J Mcvey via ARC5]

The racks have the "tel" switches and the relays to switch to "sidetone" during transmit which default to receive mode..Power can be switched in local on the from accessory panel or remote modes depending on what you want to do. The blank front radio panels have the shorting pins for "remote" operation so you could just use the supply to turn them on/off.  You can also have a power switch on the front if you prefer, since the LV wiring is there.
Short answer; no you don't need the control box.
 


     On Friday, September 11, 2015 8:03 PM, Joel R Roberts <joelroberts001 at comcast.net> wrote:
   

 . My question is, will all of the Command Set Receivers work in the 
ARC-5 receiver rack mount? The reason I am asking is I have a set of 2 
SCR-274-x receivers in a double rack, and a beautiful little ARA BCB 
receiver I picked up for a song ($45) off the Bay. There were only 2 
that bid on it and the other quit on $43.50. I have that set up in an 
ARC-5 single mount. Another question is when they are in the rack, can 
the local controls on the front of the receiver be used or do I have to 
use the control box? Seems there is always a question bouncing in my 
head. 73's ,,,,Joel  KB0FPT

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html