[ARC5] Testing 1625, VT-52, VT-62

[Ron Barlow via ARC5]

 You spawned my  curiousity, Ian, and a quick look confirmed that you are
 absolutely correct, re the VT-62.
 
 If the 801 isn't included on your set up
 chart, Wayne, perhaps the similar type 10 or type 210 is
 included.
                      
          GL & 73 de Ron n4gjv
 -------------------------------------------
 On Tue, 5/19/15, Ian Wilson <ianmwilson73 at gmail.com>
 wrote:
 
  Subject: Re: [ARC5]
 Testing 1625, VT-52, VT-62
  To: "Robert
 Eleazer" <releazer at earthlink.net>
  Cc: "ARC5" <arc5 at mailman.qth.net>
  Date: Tuesday, May 19, 2015, 10:50 AM
  
  The VT-52 is the same as a
 45S, which
  is a 45 with different
  filament voltage/current.
  
  The VT-62 is an 801, I think.
 
 
  73, ian K3IMW
  
  
  On Tue, May 19, 2015 at 7:18
 AM, Robert Eleazer <releazer at earthlink.net>
  wrote:
  
  >
 I finally unpacked the tube tester I bought a while
  back.  It's just a
  >
 simple emissions tester.  I found that it has test
  settings for the 1625
  >
 tube on the chart but lacks a socket that will
  fit.  I should be able to
 
 > make an adapter that I can plug into the octal
 socket
  by using a socket
 
 > from a stripped out Command Set transmitter I have,
 so
  maybe that won't be
 
 > too much of a problem.
  >
  > But for the VT-52 and VT-62 tubes I want
 to test, the
  tester lacks not
  > only a suitable socket but any test
 data.  Since
  we are only dealing with
  > four pins, I guess I can make an adapter
 using an octal
  plug and some
  > alligator clipleads.  But does anyone
 have any
  suggestion on what test
  > settings to use?
  >
  > Thanks,
  >
  > Wayne