[ARC5] AM broadcast reception on BC-453

[Dennis]

Pulling the slugs out sharpens the BW.  You want them in.

Dennis

Sent from my iPhone

> On Mar 19, 2015, at 3:31 PM, Leslie Smith <vk2bcu at operamail.com> wrote:
> 
>  G'day fellow list-readers,
>  I built a converter to listen to the AM broadcast band on a BC-453.
>  I have a question about sound quality and IF response.
> 
>  But first - some extra info.
>  About 2 years ago I built a converter to 'move' the 80m band to the
>  ARA nav band.
>  (In this case I used an older ARA, not a BC-453.  And yes, I do
>  understand the '453 is almost the same as the ARA set.)
>  The point here is that when I listened to SSB (converted from 80m) the
>  voice sounded as expected.
> 
>  Now, listening to AM BC broadcasts this is what I hear:
>  When the '453 is tuned to what I judge to be the 'middle' of the
>  signal (here it's 480kHz) the sound is muffled.
>  To get natural sounding voice quality I must tune the '453 a little
>  'high'.
>  When I tune the '453 'low' the muffled quality is less, but not so
>  clear was tuning 'high'.
> 
>  Important info.  The slug in the second I.F. transformer is 'stuck'. 
>  By that I mean I can't pull it out.  The first and third slugs are
>  "out".
>  I haven't tried to align the I.F. transformers.  (How stable are these
>  sets over 70 years?)
> 
>  I'm interested to know how many here listen to the BC band using one
>  of the 'nav' sets?
>  What quality of sound is heard?
> 
>  Other comment.  I'm using a circuit that is somewhat like a JFET
>  version of the Pullen - except I don't attempt to 'mess' with G(m) -
>  it's just a long-tailed pair.
>  The signal goes to the LH JFET gate, is source-coupled to the RH JFET
>  gate and thence to the drain (and untuned transformer).  From the
>  transformer the signal goes to the '453.
>  The L.O. switches the RH FET gate.
> 
>  With this arrangement I have excess gain.  Don't even think about
>  using this arrangement as a converter to feed a 'command' radio.
>  From memory, I think I'm using a one-turn link with the output
>  transformer, so I'm attenuating the signal a good deal before the
>  '453.
> 
>  73 de Les Smith
>  vk2bcu at operamail.com
> 
> -- 
> http://www.fastmail.com - The professional email service
> 
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html