[ARC5] Looking for receiver dynamotor

[Scott Robinson]

Hi Charles,

Now, when you tell us you have converted your car to 24V, then we'll 
know you're *really* committed, or maybe just ready to *be* committed...

/scott

On 3/4/15 8:54 PM, Charles wrote:
> Thanks, Mike, but since I've carefully returned both my receivers and
> transmitters to their original 24-28 volt filament wiring, already have
> one 28 volt receiver dynamotor, and built the LV power supply for one rx
> and one tx to deliver 28V @ 4 amps...  I'm pretty much committed to 28
> volts at this point :)
> -Charles
> WB3JOK/0
>
> --------------------------------
> I have some NOS that will fit perfectly, with the proper output voltage, on
> proper mounting plate and conector, however they are 14 volts input. 73 -
> Mike
>
> Mike B. Feher, N4FS
> 89 Arnold Blvd.
> Howell, NJ, 07731
> 732-886-5960
>
> -----Original Message-----
> From: ARC5 [mailto:arc5-bounces at mailman.qth.net] On Behalf Of Charles
> Sent: Wednesday, March 04, 2015 10:19 PM
> To: ARC-5
> Subject: [ARC5] Looking for receiver dynamotor
>
> Has anyone got an ARC-5 receiver dynamotor (mounted on the plate with the
> snap latches)?
> I think it's known as a DM-32 but not sure. 28V in, 250V 60mA out.
> thanks
> Charles
> WB3JOK/0
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>