[ARC5] BC-453 Current Draw

[Scott Robinson]

I presume you mean RF gain not audio gain, yes?

/scott

On 1/20/15 4:02 PM, Phillip Carpenter wrote:
> Correction. Try to provide current draw with full gain and 1/2 gain settings.
>
> So far from the data provided by Les and Bill the curve is linear from 45 through 90 volts B+.
>
> Many Thanks!
>
> Phillip
>
> Sent from my iPhone
>
>> On Jan 20, 2015, at 6:40 PM, Phillip Carpenter <carpenterpa at tds.net> wrote:
>>
>> To All Command Set Owners:
>>
>> Could all of you that can and have actual data please post the B+ voltage you use and current drawn for your BC-453 receiver (or other Command Set receiver, BC-454, BC-455, BC-946)?
>>
>> I am trying to draw a B+ volts to current draw curve. It would be nice if all could state the current draw at full AF and at 1/2 AF volume, if possible so I can have an idea what the normal and max operating current draws are for the receiver.
>>
>> This is a learning experiment and I thanks those who can participate for your help!
>>
>> Ideally the curve would go from 24v to about 250v. We'll all be able to see how the current draw follows the B+ voltage used.
>>
>> Many thanks!
>>
>> Phillip
>>
>> Sent from my iPhone
>> ______________________________________________________________
>> ARC5 mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/arc5
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:ARC5 at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>