[ARC5] Keying Approach

[AKLDGUY .]

I meant that in the case where the mike current is derived from
the modulator filament supply, as in the BC-230.

73 de Neil ZL1ANM



On Thu, Jan 15, 2015 at 10:08 AM, Robert Eleazer <releazer at earthlink.net>
wrote:

> Here is a question about something I have wondered about for some time.
> From what I have seen, aircraft PTT mikes typically use a DPST and key BOTH
> the mike line and the PTT line.  In other words, the mike is not connected
> to the transmitter until the button is pushed that also grounds the tip of
> the PL-68 and completes the transmit keying circuit as well.
>
> I am aware that some amateur radio transceivers simply turn the mike on
> with the PTT switch in series with the mike and that completes the circuit
> required to cause the transmitter to come on and the receiver to go to
> standby.
>
> Is it possible that the aircraft PTT approach reflects that on some
> transmitters just connecting the mike to the transmitter is enough to turn
> on the transmitter or is there some other reason?
>
> Wayne
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>