[ARC5] T-20 Transmitter Photos

[J Mcvey via ARC5]

Yes, there is quite a bit missing from the underside in the oscillator section.You might want to see if the oscillator coil and cap are still inside the shield.It seem that your transmitter must have been a parts source at some point. However I've never had a need to replace those sockets in the rear of the chassis. Maybe they were used for some other project? 

Most of the power amp is still there, at least.
 


     On Sunday, April 5, 2015 2:34 AM, Brian <brianclarke01 at optusnet.com.au> wrote:
   

 Hello Ben,

What do you plan to do with this Tx? It has been significantly stripped. You 
almost have a clean slate.

If you look back through Dave Stinson's offerings, you'll find his 
suggestions for converting this to 80 m.

73 de Brian, VK2GCE.

On Sunday, April 05, 2015 5:48 AM , you said:

Good afternoon all,

The sun was shining this morning so I hauled out the T-20 transmitter
for a photo session.

Photos here:

<http://www.kd5byb.net/arc5t20/ARC5t20.html>

One thing I noticed this afternoon after I made the above webpage is
that per the sheet metal...it's not a T-20, but a CCT-52209.  Now to
familarize myself with the differences between the ATA series and the
ARC-5 series...

thanks much and 73,
ben, kd5byb 

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html