[ARC5] "Curing Chirp in Command Transmitters"

[Mike Feher]

Amazing how much BS a 67 year old article can create today, along with all
of the unknown assumptions the commenters made from the minimal information
provided in H&K. I will refrain from adding my own. 73 - Mike  

Mike B. Feher, N4FS
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960 

-----Original Message-----
From: ARC5 [mailto:arc5-bounces at mailman.qth.net] On Behalf Of Kenneth G.
Gordon
Sent: Sunday, October 05, 2014 1:49 PM
To: WA5CAB--- via ARC5
Subject: Re: [ARC5] "Curing Chirp in Command Transmitters"

On 5 Oct 2014 at 1:19, WA5CAB--- via ARC5 wrote:

> My thoughts are that the filament voltage in a BC-459 is 24-28 VDC. As 
> his isn't, there is no telling what other probably unnecessary mods 
> had been done to the transmitter. As has been demonstrated numerous 
> times, Command Sets (and many other military sets) work quite well in 
> the unmodified state when operated as designed. The H&K is worthless 
> as he gives no information about what else had been done to the
transmitter to screw it up. Ignore it.

Absolutely.

Ken W7EKB
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html