[ARC5] ISO: Short Piece of Multiconductor Cable

[Bill Cromwell]

John,

I have a cable from an old landmobile radio that has a total of 16 
conductors. Two pairs are the heavier gage that you only need one pair. 
There is pair of the smaller gage wires that has a shield wire in the 
jacket. That shield I am counting as the 16th conductor. The shield for 
that pair is the only shield in the cable. You may get an offer of 
something closer to what you want - completely shielded and 16 
conductors in addition to a shield. If not - you are welcome to a hunk 
of the one I have.

73,

Bill  KU8H



On 03/28/2014 05:13 PM, J. Forster wrote:
> I'm looking for a short piece of multiconductor cable as follows:
>
> 14 condutors  #20 stranded
> 2  conductors #16 stranded
>
> preferably with a braided copper overshield
>
> and rubber or plastic jacket
>
> I need about 2 feet at the moment, but would certainly be up for a longer
> length if available. I want to make a cable to connect the CB to an ARB
> radio.
>
> Yes, I can make a nice cable out of individual wires and Expando mesh, but
> would prefer a real cable, if available.
>
> Thanks,
>
> -John
> ==============
>