[ARC5] Gluing felt

[Geoff]

"and mark them with a prick punch"

Ive marked a few of them with a good punch in my younger years (-;

Carl



----- Original Message ----- 
From: "Michael A. Bittner" <mmab at cox.net>
To: <kgordon2006 at frontier.com>; "ARC-5" <arc5 at mailman.qth.net>
Sent: Thursday, July 31, 2014 8:54 PM
Subject: Re: [ARC5] Gluing felt


> Yes, you have to make very careful measurements of the correct hole 
> positions and mark them with a prick punch.
>
> Mike, W6MAB
>
> -
>  ----- Original Message ----- 
>  From: Kenneth G. Gordon
>  To: ARC-5
>  Sent: Thursday, July 31, 2014 3:40 PM
>  Subject: Re: [ARC5] Gluing felt
>
>
>  On 31 Jul 2014 at 15:21, Michael A. Bittner wrote:
>
>  >
>  > I use a paper punch to cut the holes in the felt. It's a pliers-like 
> gizmo
>  > that punches just one hole that is the same size as the holes cut by a 
> regular
>  > 3-hole paper punch.
>
>  I tried that, but didn't have much luck with it. I could never get the 
> holes lined
>  up properly.
>
>  However, once I have the felt glued down, taking the holes out in exactly 
> the
>  correct places is easy with a pencil-iron.
>
>  Ken W7EKB
>  ______________________________________________________________
>  ARC5 mailing list
>  Home: http://mailman.qth.net/mailman/listinfo/arc5
>  Help: http://mailman.qth.net/mmfaq.htm
>  Post: mailto:ARC5 at mailman.qth.net
>
>  This list hosted by: http://www.qsl.net
>  Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4716 / Virus Database: 3986/7957 - Release Date: 07/31/14
>