[ARC5] Gluing felt

[Jay Coward via ARC5]

To remind the boys of all the pool tables back home...It deadens the metallic ringing of vibrating parts, is probably cheaper than rubber gasket and looks sexy with black wrinkle paint.
Jay
 
 
-----Original Message-----
From: Tim <timsamm at gmail.com>
To: Michael A. Bittner <mmab at cox.net>
Cc: ARC-5 List <arc5 at mailman.qth.net>
Sent: Thu, Jul 31, 2014 3:30 pm
Subject: Re: [ARC5] Gluing felt


Hi Guys - Dumb Question # 5698:  What is the purpose of that felt?

Tim
N6CC


On Thu, Jul 31, 2014 at 3:21 PM, Michael A. Bittner <mmab at cox.net> wrote:

> I use a paper punch to cut the holes in the felt.  It's a pliers-like
> gizmo that punches just one hole that is the same size as the holes cut by
> a regular 3-hole paper punch.  I use the same trick already mentioned for
> the edges.  Glue the punched felt down, let it dry, and then cut the edges
> with a scissors.
>
> Mike, W6MAB
>
> -
>   ----- Original Message -----
>   From: Kenneth G. Gordon
>   To: ARC-5 List
>   Sent: Thursday, July 31, 2014 1:13 PM
>   Subject: Re: [ARC5] Gluing felt
>
>
>   Lastly, I use a hot pencil-soldering iron to burn the holes for the
> posts out to
>   size.
>   Ken W7EKB
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html