[ARC5] Regulator noise. (was BC-454 - screen voltage)

[Tim]

Hi Leslie - Of course, the 3 terminal regulators must first be bypassed at
the input and output terminals per the application notes.  Especially if
there is any "lead length" involved....I've found many cheap devices where
this cost was ignored and the device radiated like a spark gap
transmitter.  Cheap insurance.

Once that is done, any associated zener noise that is underlaying is
another matter.  I wonder what percentage of the output voltage the P-P
zener noise is.....I've not found that to be detectable (by me) in HF/VHF
receiver circuits that I have played with...

73, Tim
N6CC

On Sat, Mar 9, 2013 at 9:00 AM, Leslie Smith <vk2bcu at operamail.com> wrote:

> Hello Dennis
> Quote: " Zeners are often even noisier than an ionized gas tube.  But
> the standard
> > fix is easy; an RC feeding a load."
>
> I have a well informed associate who says the common 3 terminal
> regulator family  eg LM7812 are noisier than zener diodes.
> This idea has always intrigued me.
>
> I'd be interested to hear your observation on the relative noise output
> from each device.  Is the noise from a VR tube radiated noise, or passed
> along the supply line?
> If the noise is "line-coupled" will an lowpass "LC" kill the noise, eg
> 1mH choke plus 10nF to common?
>
> 73
>
>   Leslie Smith
>   vk2bcu at operamail.com
>
>
> On Sat, Mar 9, 2013, at 13:53, Dennis Monticelli wrote:
> > Zeners are often even noisier than an ionized gas tube.  But the standard
> > fix is easy; an RC feeding a load.
> >
> > Dennis AE6C
> >
> > On Fri, Mar 8, 2013 at 3:56 PM, Brian Clarke
> > <brianclarke01 at optusnet.com.au>wrote:
> >
> > > Hello Ken,
> > >
> > > The tube characteristics written in tube manuals (whose?) are for
> > > establishing other characteristics, like life, gain and emission. They
> are
> > > not set in stone.
> > >
> > > If you want a quiet receiver, I would leave the Voltage regulator tubes
> > > out - they rely on ionisation of the enclosed gas = very noisy. I know
> 'coz
> > > I tried it once - with a BC-454.
> > >
> > > If you want to experiment with tube element Voltages, set up an octal
> > > socket on a breadboard, and measure noise and distortion vs Voltage.
> Trying
> > > to do that inside a built receiver makes it very difficult to discover
> > > what's causing what.
> > >
> > > 73 de Brian, VK2GCE.
> > >
> > >
> > > On Friday, March 08, 2013 8:14 AM, you said:
> > >
> > >
> > >  Looking at the tube tables, I see that the screen voltage to the
> 12SK7s
> > >> is 150 VDC when the
> > >> plate voltage is 250 VDC. When the plate voltage is 100 VDC, the
> screen
> > >> voltage should also
> > >> be 100 VDC, according to those tables.
> > >>
> > >> Both ratings are for when the tube is operated in Class A.
> > >>
> > >> This receiver is still using the original screen-voltage
> voltage-divider
> > >> (the two black wire-
> > >> wound resistors standing up in the back). Screen voltage is 75 VDC to
> all
> > >> the tubes in the
> > >> receiver, except the 12A6. Plate voltage, with the power supply I am
> > >> presently using, is 275
> > >> VDC.
> > >>
> > >> I wish to reduce the plate voltage to no more than 180 VDC. I plan to
> use
> > >> a VR-75 and a VR-
> > >> 105 in series for this.
> > >>
> > >> What is the consensus concerning screen voltage to the RF and IF amps?
> > >>
> > >> My plan is to raise it to at least 100 VDC via a resistive voltage
> > >> divider across the 180 VDC
> > >> regulated input.
> > >>
> > >> In your opinion, what might be the result, both pro and con?
> > >>
> > >> In my opinion, this will result in greater gain (due to the higher
> > >> relative SG voltage) and lower
> > >> noise (due to the reduced plate voltage) at the RF and IF amps.
> > >>
> > >> Ken W7EKB
> > >>
> > >
> > > ______________________________**______________________________**__
> > > ARC5 mailing list
> > > Home: http://mailman.qth.net/**mailman/listinfo/arc5<
> http://mailman.qth.net/mailman/listinfo/arc5>
> > > Help: http://mailman.qth.net/mmfaq.**htm<
> http://mailman.qth.net/mmfaq.htm>
> > > Post: mailto:ARC5 at mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> > >
> > ______________________________________________________________
> > ARC5 mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/arc5
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:ARC5 at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> --
>   Leslie Smith
>   vk2bcu at operamail.com
>
> --
> http://www.fastmail.fm - IMAP accessible web-mail
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>