[ARC5] Re-reading Gordon White article...L-2 in a 'command' receiver

Mike Morrow kk5f at earthlink.net
Thu Jun 6 17:33:28 EDT 2013


Ken wrote:

> In every case, the resonant frequency of L-2 is way below the
> lowest frequency the receiver will tune.

Here's what the June 29, 1940, ATA/ARA instruction book has to say
about L-2:

"C-39 (across L-2 in the 190-550 KC receiver only) serves to tune
L-2 to a frequency lower than 190 KC, and by so doing increase the
amplification of signals at the low frequency end of the tuning range.
This assists in producing a reasonably uniform receiver sensitivity
over the tuning range.  The plate to screen capacitance of the RF
amplifier tube, Type 12SK7, and the wiring capacitance to L-2,
perform a corresponding function in all other receivers."

That, no doubt, would be the explanation that Dr. Drake would give you.

Mike / KK5F 


More information about the ARC5 mailing list