[ARC5] Re-reading Gordon White article...

[J. Forster]

???

I just looked at the print and L-2 is in the plate circuit of the 12SK7 RF
Amplifier, and sees the received frequency.

-John

================




> I have been re-reading an article written by our own esteemed Gordon White
> for CQ
> magazine back in 1967 entitled "Command Set Receivers for All Frequencies
> - The Easy
> Way". In this article Gordon published data he got directly from ARC
> detailing the various coil
> and capacitor parameters to make receivers that cover from 190 Khz,
> through 40 MHz.
>
> One particular parameter I find to be both extremely interesting and
> completely puzzling, and
> I hope someone here can explain this to me.
>
> This is the resonant frequency of the RF amplifier plate coil, L-2, called
> the "mixer coil" in the
> data. The data is given as "...cold, with all tubes in place".
>
> For instance, for the 3 - 6 MHz receiver, that resonant frequency is 2200
> KHz. If one adds the
> IF frequency, 1415 KHz in this case, the result is 3.615 MHz.
>
> In every case, the resonant frequency of L-2 is way below the lowest
> frequency the receiver
> will tune.
>
> Anyone have a clue why this was done?
>
> I really don't understand.
>
> Ken W7EKB
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>