[ARC5] R-27/ARC-5 Hookup Question

[Kenneth G. Gordon]

On 19 Jul 2013 at 17:47, J. Forster wrote:

> Roughly, yes, except in the dyno powered connection there is an C-L-C
> filter between the output stage, which is directly on the dyno B+
> terminal, and the earlier stages of the receiver.
> 
> I don't know if that choke will handle the DC current of the output
> stage without failure, if powered from the rear connector.

Yes. It will. It is a 3 H choke, internal resistance, 288 to 363 ohms. Its 
purpose is to filter the dynamotor hash off the DC. It will handle the current of 
the receiver easily.

Also, the racks that the receivers normally were plugged into did all the 
power and control from that connector.

Ken W7EKB