[ARC5] BC-348M Update

[Tom Elmore]

All, I have the BC-348M up and working now on the bench. The dynamotor has
had it's bearings cleaned and re-greased too. I used the BC-348E Manual from


http://www.jamminpower.com/main/bc348.html  James Moorer's site which also
covers the M model. I still have caps to change out but capacitor labeled 

"9-13" a black beauty was dead shorted. This is located on the switched side
of the muting circuit right off of pin #6 on the rear power connector.  So
far I have copied WWV in both Colorado and Hawaii on 5, 10 and 15 Mhz here
in Alaska as well as some NDB activity down around 300 Khz.  Is there a way
to adjust the bandspread in the oscillator in the bandspread by chance? 

 

 

 

 

 

Thank You 

 

Tom Elmore KA1NVZ

Anchorage, Alaska