[ARC5] P.S.: A Super-Easy 95 Volt B+ Supply for Your Projects.

[David Stinson]

P.S.
Be sure to read the spec sheet.
You can use pin 8 to "trim" the outputs +/- 5%.

Pin 4 will turn the converter "OFF" if you apply a logic HI voltage,
but beware:  If any voltage is applied to pin 4 while 
the converter is otherwise unpowered, it will damage 
the PWM controller.  Don't know why, and I'm going
to seal pin 4 with RTV on my projects, just to protect it.