[ARC5] [BoatAnchors] Sharpening the RU Receiver with Regeneration

[David Stinson]

-----Original Message-----
>From: Brian Clarke <brianclarke01 at optusnet.com.au>

>Great looking components. 

Thank you kindly, sir, and for your help with this set.

>1. Shift the antenna changeover box to the very top of your control stack so 
>neither you nor any other 'investigator' can get across the RF at PTT time

I did that in the past with a set, but the long single-wire run from the 
front of the transmitter means a lot of stray RF, which is a problem
that must be addressed in these sets in any event.
Also- part of the matching network to transform the Lo-Z output
of the transmitter to a 50-Ohm line (an UNUN) is in the antenna switch,
so a short run from the transmitter is required. 
No burnt fingers so far ;-).