[ARC5] Left Hand UNF Screws

[Leslie Smith]

Yes, thanks Bruce.
I checked McMaster's - but I DO need the UNF (28 tpi) bolt.

Thanks



Les
[1]vk2bcu at operamail.com


On Thu, Nov 8, 2012, at 13:20, Bruce Long wrote:

MacMaster carr has 1/4 28 right hand but only 1/4-20 in left hand--  in
case you have not checked yourself...
  __________________________________________________________________

From: Leslie Smith <vk2bcu at operamail.com>
To: ARC-5 List <arc5 at mailman.qth.net>
Sent: Wednesday, November 7, 2012 4:54 PM
Subject: [ARC5] Left Hand UNF Screws
Hi List-readers,
Does anyone know where I can buy 1/4 inch x 3 inch UNF cap-head screws.
1/4 inch UNF = 28 threads per inch (a fine thread)
Thanks,
  Leslie Smith
  [2]vk2bcu at operamail.com
--
http://www.fastmail.fm - Does exactly what it says on the tin
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[3]ARC5 at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

References

1. mailto:vk2bcu at operamail.com
2. mailto:vk2bcu at operamail.com
3. mailto:ARC5 at mailman.qth.net

-- 
http://www.fastmail.fm - Faster than the air-speed velocity of an
                          unladen european swallow