[ARC5] ARB Modifications

[Mike Everette]

There was a "Surplus" column/conversion article devoted to the ARB in CQ (where else....) some time between mid 1956 and the end of 1957.  I used to have a copy of the issue but would have to find it, and that could take a while....  but to my knowledge, unless something was published in 73 Magazine during the 60s (and it may well have been), that's it.

73

Mike
W4DSE

--- On Thu, 11/1/12, J. Forster <jfor at quikus.com> wrote:

> From: J. Forster <jfor at quikus.com>
> Subject: [ARC5] ARB Modifications
> To: ARC5 at mailman.QTH.net, Milsurplus at mailman.QTH.net
> Date: Thursday, November 1, 2012, 12:35 AM
> Hi,
> 
> Thanks to Mike Hanz, I just got a dyno for my ARB from the
> Bay of E. On
> looking at my set, it seems the previous owner had started
> to modify it.
> Fortunately he got bored or something before doing much
> damage...  I
> think. There are a few wires disconnected and a couple of
> parts removed.
> The front panel Power connector is the biggest.
> 
> Anyway, other than the Surplus Perversion Manuals, does
> anyone know of
> articles that might have been the impetus for the
> 'cxonversion'. I'd like
> to undo them.
> 
> There is one obvious change: A wire has been added from Pin
> 8 of V101..  a
> filament pin to a 12SF7 to V102 and elsewhere. There are
> some wires
> disconnected from V106 also.
> 
> Thanks,
> 
> -John
> 
> =============
> 
> 
> 
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>