[ARC5] Hewlett Packard Signal Generator HP-606B - Removing screws

[Lloyd Godsey]

Possibly what you need is a BRISTOL wrench.
Allen wrench with the mumps. Best I recall that's what was used.

Thanx
Lloyd Godsey KK7IZ
kk7iz at cox.net 
480-620-7145
http://www.lloydsdipsydumpster.com/
http://antiqueradioarchives.com/


-----Original Message-----
From: arc5-bounces at mailman.qth.net [mailto:arc5-bounces at mailman.qth.net] On
Behalf Of Leslie Smith
Sent: Thursday, March 01, 2012 5:29 PM
To: ARC-5 List
Subject: [ARC5] Hewlett Packard Signal Generator HP-606B - Removing screws

Hello Group,
I have a 1960's vintage signal generator I wish to use to calibrate my
ARC-5 "command" radios.
The model:  HP-606B.

At the moment it's un-servicable or SNAFU.
To get inside the RF cage I need a special tool (an allen key or hex
key) on a long shaft.
Normally this is supplied by HP, with the instrument, but alas ....

I am unable to find the correct size allan key.
1/8 is too big, and 3/32 is too small.
3 mm is too big and 2.5 mm is too small.
Beyond that I WILL need the correct size on an extended shaft (may have to
drill & silver solder a shorter key onto an extension).

Perhaps it's 2.54mm or 0.100 inches?
Help!  <-   almost begging!

73

--
  Leslie Smith
  vk2bcu at operamail.com


On Thu, Mar 1, 2012, at 06:55 PM, Mike Hanz wrote:
> On 3/1/2012 6:04 PM, J. Forster wrote:
> > I got some tools wet inadvertantly and they rusted some. I remembered
that
> > lemon juice could be used to remove surface rust, so I tried it on a
mill
> > file. And, it works !!
> >
> > Practically speaking, I put the file in a ZipLok bag and added some Real
> > Lemon and let it sit overnight. It looks like new! It does give off a
> > kinda funky smell though.
> 
> It does indeed work, John.  But if you want to see the array of opinions 
> on the matter, try 
>
http://www.practicalmachinist.com/vb/general/sharpening-files-anybody-done-2
31799/
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 

-- 
http://www.fastmail.fm - Same, same, but different...

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html