[ARC5] Cost of sets - 1950 and 2010

[Glenn Little WB4UIV]

2.6 mm hardware is used extensively in cameras.
I have to replace these when I repair a camera due to a previous tech 
using a Phillips driver.
Cameras, that I work on, use JIS and JCIS heads and require the proper driver.
To tell the difference between a 2.5 and 2.6 mm bolt, I use a known 2.5 mm nut.
This will not fit on a 2.6 mm bolt.

73
Glenn
WB4UIV


At 04:37 PM 9/24/2010, you wrote:
>On 24 Sep 2010 at 20:26, Leslie Smith wrote:
>
> > Gentlemen,
> > It's not DIFFICULT to tell the difference between 2.5mm and 2.6mm
> > pitch threads, it's impossible.  There is NO 2.6 mm thread.
>
>Except in Japan. ;-)
>
>Ken W7EKB
>______________________________________________________________
>ARC5 mailing list
>Home: http://mailman.qth.net/mailman/listinfo/arc5
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:ARC5 at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html