[ARC5] FS: Command Set Front Box

[Dennis Monticelli]

I'm looking for a clean bottom plate.  I have removed the mods the original
owner made to this receiver, but the bottom plate is missing.

Dennis AE6C

On Wed, Apr 21, 2010 at 7:47 AM, <WA5CAB at cs.com> wrote:

> One common ailment of Command Set receivers with otherwise relatively minor
> modifications is that the hacker soldered to the pins inside the
> front-mounted box.  It's very difficult to successfully remove solder from
> all 8 of
> the pins such that the leaves are again free to move.  And 7 out of 8 is no
> better than none out of 8.  Monday while looking for something else I
> didn't
> find I came across a couple of plastic bags of parts stripped off of
> various
> Command Set receivers.  Included were several of the boxes (NOT the
> external
> plug-ins).  Condition is cut-off (you clean the solder terminals) and no
> sign of solder on the 8 pins.  $3.00 each plus postage to anywhere.
>
> There were other parts as well, covers (fixed and removable), capacitor
> covers, bottom plates, and grid lead brackets.  But I didn't take the time
> to
> catalog it.  If anyone needs anything of that sort, contact me and I'll
> look
> (eventually).
>
> Robert Downs - Houston
> wa5cab dot com (Web Store)
> MVPA 9480
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>