[ARC5] ARC-5 mini-banana plug replacements

[Mike Feher]

If you have busted ARC-5 series IF transformers the pins from those will
work as I have used them. It has been a long time ago, now that I think of
it some more, the pins may have been in the sockets and they had to be taken
apart. They are inserted into mica. So, check out receiver carcasses. 73 -
Mike

Mike B. Feher, N4FS
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960




-----Original Message-----
From: arc5-bounces at mailman.qth.net [mailto:arc5-bounces at mailman.qth.net] On
Behalf Of hwhall at compuserve.com
Sent: Sunday, August 16, 2009 2:48 AM
To: arc5 at mailman.qth.net
Subject: [ARC5] ARC-5 mini-banana plug replacements

I see in the recent issue of Electric Radio an article on ARC-5 gear 
and making plugs using scrapped pins or new mini banana pins and the 
author wondered if there was a source for the new pins. I recall some 
time ago that someone had offered a supply of them here and wonder 
where they came from (I bought some then but do not now recall the 
situation). It may be worth sending a note to ER about where they can 
be obtained. FWIW, I found a stash of the mini banana pins at a local 
parts place, if the original supply has dried up.
--Wayne
  WB4OGM


______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html