[ARC5] dynamotor parts WTB

[jcoward5452 at aol.com]

Hi Groups,
 I am looking for :
  1  "cradle" (don't know what else to call it) for DM-32,DY-2/ARR-2, 
the part between the base plate and the dynamotor.
  2 end bells and proper screws (w/safety wire holes) and washers, for 
same as above
  2 complete hardware sets to mount the mounting plate to "cradle" and 
"cradle" to dynamotor, for same as above.This would include the 4 
phillips screws that attach the "cadle" to the dynamotor and 3 of the 
sloted "spacers" and 3 each screw and lockwasher.One of my re-storers 
has the "cradle" riveted to the dyno.I've never seen that before.Anyone 
heard of, or is there, an MWO to replace the screws with rivets?
 I'll describe as follows:
      A.G.Redmond Dynamotor Model 5056 followed by the standard 60 mA 
info and then Zenith Radio Corp. 141G35; all this is on a decal, not a 
nomenclature plate.
Anyway,I've got a couple of dynamotors that might live again if some 
"organ donars" are out there.
 Thanks,
             Jay KE6PPF