[ARC5] BC-348 DYNAMOTOR

[Bob Macklin]

We use hear from a hair dryer style heat gun to loosen old model airplane
engines. That my work on the brush caps.

Bob Macklin
K5MYJ
Seattle, Wa,
"Real Radios Glow in the Dark"
----- Original Message -----
From: "Mike Hanz" <AAF-Radio-1 at aafradio.org>
To: "J Forster" <jfor at quik.com>
Cc: <WB9NWN at SBCGLOBAL.NET>; <arc5 at mailman.qth.net>
Sent: Wednesday, January 23, 2008 5:23 PM
Subject: Re: [ARC5] BC-348 DYNAMOTOR


> J Forster wrote:
>
> > IMO, a screwdriver in the slot could well break the caps.
> >
>
> Could well, if the blade is full width contact and one can maintain
> pressure on the blade to prevent it from camming out during the torque
> process.  In any case, both potential outcomes of the proffered concept
> are true, and have been tested in the aafradio labs with equal if
> ambivalent results...heh, heh.  :-)
>
> _______________________________________________
> ARC5 mailing list
> ARC5 at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/arc5
>