[ARC5] Trade ATA for ARC-5 Stuff

[WA5CAB at cs.com]

I don't have any of either contact configuration in either backshell.  But I 
will mention that any of the several different 19-contact connectors from the 
A.R.C. Type 12/15 can be converted to either one of the insert convigurations 
used in the earlier sets.  First grind off the external alignment key.  Then 
plug the appropriate unused contact so that the connector will only fit 
AN/ARC-5 or ATA/SCR-274-N.

In a message dated 9/17/2006 7:53:00 PM Central Daylight Time, 
kk5f at earthlink.net writes: 
> >A pair of the 18 pin 6962 connectors or the open wire equivalent 9585.
> >(MD-7 to C-29)
> >One 12 pin 9377 or equiv. 9589.   (MD-7 to Xmtrs) 
> 
> These two are among the hardest of all A.R.C. plugs to locate.  They have a 
> slightly different pin arrangement on a couple of pins, compared to the much 
> more common ATA and SCR-274-N 12- and 18-pin plugs.
> 

Robert Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at houston.rr.com> (Backup email)