[ARC5] Re: [Milsurplus] Command Set Receiver/Transmitter Frequency Spotting

[Jack Antonio]

I've done this on the SCR-274N sets I've put together. A toggle
switch near the control head that opens up the key line to
the receiver rack.

But, even with the RF gain all the way down, there is enough RF pickup
to overload the receiver, the antenna lead has to be disconnected as well.

Jack Antonio WA7DIA
scre287 at sbcglobal.net

Mike Morrow wrote:

   A MONITOR-NORMAL switch for these command sets would simply
  need to open the connection to pin 5 in the cable between the receiver 
rack and the modulator.
   This would make it simple to adjust a receiver to the associated 
transmitter.