[ARC5] Modeling the PA stage
David Stinson
arc5 at ix.netcom.com
Fri Apr 14 19:01:26 EDT 2006
----- Original Message -----
From: "Ian Wilson" <ianmwilson at earthlink.net>
Subject: RE: [ARC5] Modeling the PA stage
> I spent a few hours on this yesterday. Any numbers in the following are
for
> the BC-459 at 7.1MHz.
> Coupling coil: on a 1.25" former. Assuming 1 turn; about 0.075uH.
Thanks for doing this work, Ian.
The number of turns on the link coil depends
on the model of BC-459. Early contracts like
A.R.C. 1470-NY-41 and W.E. 1509-NY-41
had fewer turns than the later W.E. and
Colonial versions. IIRC, the early 7 MC sets had
either one or two turns, and the later had either
two or three, respectively. The other ranges
varied in a similar fashion. My radios aren't
handy at the moment, so I don't remember the
exact number of turns, nor does it seem to be
listed in the manual. Perhaps you should eyeball it.
73 Dave S.
More information about the ARC5
mailing list