[ARC5] R28 xtal question

[bern]

John,
  Each channel (A, B, C, D) of the R28 can be tuned to any frequency in
the 100 to 150 MHz frequency range.  That tuning is just done by undoing
the allen wrench screw under the door in the front of the receiver and
turning the frequency dial on the top of the receiver.
Paul Bernhardt

Work:P.A. Bernhardt                Home: Paul Bernhardt, KF4FOR
     Code 6794                           5704 Ridge View Dr.
     Naval Research Laboratory           Alexandria, VA 22310
     Washington, DC 20375
Tel: 202-767-0196                        703-960-9656
FAX: 202-767-0631

On Mon, 29 Apr 2002, John J Mccarty wrote:

> 
> 
> 
> 
> 	Hey guys;
> 
> 
> 
> 		If I wanted to set an R28 to a freq in the 2 meter band,
> 		say 144.144 (local am net freq), does the math for the
> 		xtal freq calculation look like:
> 
> 			(144.144 -12) / 18 = 7.3413
> 
> 		Also, are there certain channels for certain freq ranges
> 		like in the T23 ?
> 
> 
> 
> 
> 						Tnx + 73
> 
> 
> 
> 							John n9hrt
> 
> 
> 
> _______________________________________________
> ARC5 mailing list
> ARC5@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/arc5
>