[Antennas] CB vertical GP to Ham use

[Ken K6MR]

See if this instruction manual matches what you have.  This is the HyGain CLR 2, which was one of the most popular verticals during the CB craze.

http://www.cbtricks.com/ant_manuals/hygain/model_473/graphics/hy-gain_473_clr-2.pdf

Ken K6MR




n 3/2/2018 4:41 PM, Larry wrote:
> The vertical portion of this thing is a little over 16Ft and the 
> radials are 8 ft in length.  Doesn't look like there is much extra to 
> work with on those 3 items.
>
> To shorten the vertical portion down to 1/4 length of 8.153 ft would 
> be a challenge due to the telescoping nature of the 4 ft sections used 
> to make up the entire vertical length, which has a 3 wire top hat on 
> the end of it.  I can more than likely make a 1/2 wave vertical 
> section which would be 17 ft 2 inchs for 10 FM without any problem.  
> I'd like to go to 5/8 wave for 10 FM which would be 20.61 ft but that 
> would take about 3 more ft of tubing which i don't have and could be 
> difficult to come up with due to the telescoping nature of the 
> existing stuff, swagged end and all.
>
> guess i'll put it together and see how far each way it will go.
>
> Larry
>
> W0OGH
>
>
> ______________________________________________________________
> Antennas mailing list
> Home: http://mailman.qth.net/mailman/listinfo/antennas
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Antennas at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Antennas mailing list
Home: http://mailman.qth.net/mailman/listinfo/antennas
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Antennas at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html