[Antennas] Ground rod questions (Ground currents)
rbethman
rbethman at comcast.net
Tue Jun 30 12:18:06 EDT 2009
Loren,
You ARE correct! However, a very poor power ground CAN have a definite
impact upon upon RF systems and the noise they deal with.
That is the point I was trying to get across. The neutral IS supposed
to deal with imbalances. The power system ground IS "supposed" to deal
with short circuits.
BUT, sometimes the engineers that design the distribution system NEVER
pay *any* attention to the soil conductivity. Therein lies problems all
over the place.
Bob - N0DGN
Loren Moline WA7SKT wrote:
> Hello all,
>
> One thing to note about a power ground. It purpose is for short circuit protection back to the utility and has nothing to do with getting rid of noise.
>
> If there is no short circuit or resistive leakage to ground there is no reason for current to flow in the ground circuit. Unbalanced current in the 240Volt vs the 120volt should flow in the neutral.
>
> I just see no reason to worry so much about a ground unless you have faulty wiring as far as current flow.
>
> The other concern about grounds should only be for either ground or radial systems for antennas
> or for lightening protection.
>
> You should not depend on your power system ground for your antenna systems because in doing so will cause rf current to flow in your house ground system which can cause lots of problems. The power system ground at the pole which should provide a ground circuit to your power panel ground is not for RF short circuit to ground. Only short circuits in your power system.
>
> If I am wrong on any of these please let me know.
>
>
>
> Loren WA7SKT
>
--
Bob - NØDGN
More information about the Antennas
mailing list