[Antennas] Antenna Modeling

[Chris Trask]

    Okay, different programme from what I was referring to.

Chris

     ,----------------------.       High Performance Mixers and
    /    What's all this     \    Amplifiers for RF Communications
   / extinct stuff, anyhow?  /
   \  _______,--------------'           Chris Trask / N7ZWY
  _ |/                                  Principal Engineer
 oo\                                  Sonoran Radio Research
(__)\       _                             P.O. Box 25240
  \  \    .'  `.                     Tempe, Arizona 85285-5240
   \  \  /      \
    \  '"        \                 IEEE Senior Member #40274515
     .       (  ) \
      '-| )__| :.  \              Email: christrask at earthlink.net
        | |  | | \  '.       http://www.home.earthlink.net/~christrask
       c__; c__;  '-..'>.__

                       Graphics by Loek Frederiks

----- Original Message -----
From: "Billy Cox" <aa4nu at ix.netcom.com>
To: "Chris Trask" <christrask at earthlink.net>; "'antennas'"
<antennas at mailman.qth.net>
Sent: Sunday, August 24, 2008 1:33 PM
Subject: Re: [Antennas] Antenna Modeling


> Hi Chris,
>
> This may be a different animal ...
>
> http://www.antennamodel.com/
>
> I use it for it's MININEC code engine to compare
> the results from the NEC-2 code based engine ...
>
> 73 de Billy, AA4NU
>
> > >
> >> EZNEC <at least through version 3.xx> still builds
> >> or edits the WIRES in the same fashion as the DOS
> >> version. I also use Antenna Model, and it too uses
> >> a similar interface. EZNEC is a bit easier for me,
> >> but I have been using ELNEC/EZNEC for many years.
> >>
> >    I thought I was the very last person still running around who had
used
> > AMP (Antenna Modeling Program).  Using ELNEC/EZNEC all these years, I
> > really
> > miss the geometry copy, reflection, and rotation instructions from AMP,
as
> > well as the solid plates that were in AMPII.
> >
> > Chris
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.526 / Virus Database: 270.6.7/1631 - Release Date: 8/24/08
12:15 PM
>
>