[Antennas] Looking for the best antenna modeling program for

[Igor Sokolov]

I have started with Mininec many years ago. Then I have been using EZNEC for
quite a some time. For the last few years I figured MMANA is the best for
me. When you need to model horisontal wires less then 0.1 WL from the ground
use NEC2 for MMANA. It overcomes the limitations of the MININEC that MMANA
is based on.
You can find both programs here www.dl2kq.de
The site is mainly in Russian but there is translation available on the site
to several languages including English.

73, Igor UA9CDC

----- Original Message -----
From: <W3HKK at aol.com>
To: <Antennas at mailman.qth.net>
Sent: Tuesday, January 24, 2006 7:43 PM
Subject: [Antennas] Looking for the best antenna modeling program for


> assorted vertical and wire antennas located close to the ground....ie
> verticals,  bobtail curtains, inverted v's, loops, from 0-50 ft high.
>
>
> Accuracy, ease of use, printouts,  and cost are important  considerations,
in
> that order.
>
>
> Any suggestions from happy users?
> ______________________________________________________________
> Antennas mailing list
> Home: http://mailman.qth.net/mailman/listinfo/antennas
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Antennas at mailman.qth.net