[Antennas] Tri Band Quad Baluns

[Jim Miller]

David;

They are long ago out of business.

Regards,

Jim, K4SQR
www.comteksystems.com
4-SQR's+2 el. vertical arrays
2-High+3-High stack yagi systems
Radial ring feedpoint plates

On Thu, 31 Aug 2006 14:33:37 -0400 "David C. Hallam"
<dhallam at rapidsys.com> writes:
> Does Skylane ring a bell for anyone regarding a company that might 
> have made
> quads back in the 1970's.  If so, do you know anything about their 
> current
> status; long gone, possible contact, still in business, etc,?
> 
> David
> KC2JD
> 
> -----Original Message-----
> From: antennas-bounces at mailman.qth.net
> [mailto:antennas-bounces at mailman.qth.net]On Behalf Of David C. 
> Hallam
> Sent: Thursday, August 31, 2006 1:34 PM
> To: Antennas
> Subject: [Antennas] Tri Band Quad Baluns
> 
> 
> Some years ago when I had a 2-element tri band quad up I used a 
> balun to
> match the 50-ohm feed line to the 3 driven elements of the quad.  It 
> was a
> commercially manufactured balun whose manufacturer I do not 
> remember.  I am
> interested in putting up another quad and can find no information 
> about any
> similar balun being available. Does anyone on this list know who 
> might have
> made this balun and is it still made, or are there any similar 
> baluns
> available?
> 
> David
> KC2JD
> Clearwater, FL
> 
> 
> 
> 
> 
> ______________________________________________________________
> Antennas mailing list
> Home: http://mailman.qth.net/mailman/listinfo/antennas
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Antennas at mailman.qth.net
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ______________________________________________________________
> Antennas mailing list
> Home: http://mailman.qth.net/mailman/listinfo/antennas
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Antennas at mailman.qth.net
> 
> 


Jim, K4SQR
www.comteksystems.com
4-SQR's+2 el. vertical arrays
2-High+3-High stack yagi systems
Radial ring feedpoint plates