[Antennas] Simple Dipole Question

Bob Wilder [email protected]
Thu, 24 Oct 2002 15:37:28 -0500


Of course you fed this antenna to an antenna tuner....Your actual antenna=
 will
appear as a dipole cut for about 4.3 MHz...that is about 116 feet each side=
=20
of center.
This comes from the 32.9 feet half wave dipole for 14.2 MHz (16.45 feet=20
each side of
center)with 100 feed added to each side of the dipole down to the 1:1 Balun.
If you use an antenna tuner this antenna should work well from 80 thru 10=20
meters...
BUT and antenna tuner is necessary.

Bob




At 02:24 PM 10/24/2002 -0500, Kelley Shaddrick wrote:

>Today, with nothing better to do, I stuck up a dipole cut for 20m (14.2=
 MHz)
>using 468/frequency. It's strung between two trees at about 50 feet in the
>air. I fed it with ladder line (450 ohm) to the house (about 100 feet) to a
>1:1 balun and some RG-8X (about 20 feet) into the 2nd floor shack. The
>initial swr reading is infinite across the band, no dip anywhere, not even=
 a
>little. I suppose since I'm using ladder line, or window line, I need to=
 cut
>things different. Any thoughts?
>
>Thanks,
>
>Kelley -- W=D8RK
>
>- - -
>
>Your moderator for this list is:
>Larry Wilson KE1HZ [email protected]
>_______________________________________________
>Antennas mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/antennas
>
>
>---
>Incoming mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.406 / Virus Database: 229 - Release Date: 10/21/2002

Bob Wilder, AF2HD/AFA2HD
6032 Idlemoore Court
Theodore, AL 36582-4117
251-653-5274
http://home.earthlink.net/~bwild
All incoming and outgoing messages
virus checked with AVG version
6.0.406Visus database 229
updated 10/21/2002 Get your FREE copy at
http://www.grisoft.com


--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---