[Antennas] Beam info needed

[wb8jkr@juno.com]

  Guys,

 A friend of mine "inherited" a triband yagi but has
no documentation on it, we *think* it may be an older
Hy-gain model but really don't know. It has what appears
to be a separate 10 meter reflector element and none
of the beams on the Hy-gain web page show three element
yagi's with a separate 10 meter reflector. Can someone
take a look at the below listed spec's on this beam and
maybe give an educated guess as to what model/make it
might be so we can try and get an assembly sheet for it?

Thanks,

Mark  WB8JKR

-------------------------------------------------------------------------
-----------

Here is the ant info.

Boom:	18'1.5" x 2" dia.

DE:	12' 4.5" each side.
RE:	27' 2"
DI:	24' 4"

Each element has a single trap on each side.

10 Meter element:	17' 8"

Tuning stub: two 3/4" tubes 4' long side by side with shorting strap 2"
from
cold end grounded and insulator near balun end.

Has wire boom support to each end.

Balun is rectangle box mounted to top of boom with two long screws and
mast
clamp. Has Hy-Gain stamped into plastic.

Need to verify which end is reflector end of boom.


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.