[AMRadio] LINK COUPLING)

[edwmullin at aol.com]

That looks alot like the one here.? I just have the one CAP though. Variable link input, and clip leads on the cap, and OWL, and I can configure it anyway I want.? Colored tape marks the more common tuning points for preferred frequencies.


-----Original Message-----
From: Larry Szendrei <ne1s at securespeed.us>
To: W5AMI <ars.w5ami at gmail.com>; Discussion of AM Radio <amradio at mailman.qth.net>
Sent: Thu, Sep 19, 2013 7:27 pm
Subject: Re: [AMRadio] LINK COUPLING)

 
 
 
On 9/18/13 1:13 PM, W5AMI wrote: 
> Good point Don, and thanks as always... 
> 
> Here is a photo of my homebrew tuner I built I long time ago.  It is 
> mounted to the wall right where the feed through insulators come in (just 
> below).  I think I sent you a photo of the coil several years ago before I 
> made this thing up.  C2 on the right simply makes it easier to adjust the 
> link coupling.  I actually had to remove several plates from C1 since it 
> was way more than I needed.  The clock is not part of the tuning system... 
> I call this "The Ugly Tuner", but who cares, as it works great. 
> 
> http://w5ami.net/images/tuner.JPG 
> 
> 
Brian, if you don't mind, describe the wire you're feeding and all the  
bands for which you've had success using the system. 
 
Thanks! 
-Larry/NE1S 
______________________________________________________________ 
Our Main Website: http://www.amfone.net 
AMRadio mailing list 
Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ 
List Rules (must read!): http://w5ami.net/amradiofaq.html 
List Home: http://mailman.qth.net/mailman/listinfo/amradio 
Post: AMRadio at mailman.qth.net 
To unsubscribe, send an email to amradio-request at mailman.qth.net with 
the word unsubscribe in the message body. 
 
This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html