[AMRadio] HT and HT accessories FS

Tue Jul 16 14:11:41 EDT 2013

HTs and HT accessories For Sale:

Azden PCS-300, 2 meter FM HT:

The PCS-300 HT covers the 2 meter band, and has 3 watts in
high power or 1 watt in low. It has a very good receiver.

Of course it has memories, and scan features as one would
expect. The LCD display is larger than some.

This particular HT is in its original box, and in pristine
condition. It includes the desk stand charger, and the
earphone is still in the box with it. It includes its
manual, with the original warranty card.

All of this for only $60

Yaesu FT-209, 2 meter HT:

The Yaesu FT-209R operates on 2 meters from 144-148
MHz with 2.5 watts. The controls are easy to use.
High/Low power and VOX on/off is selectable from
the top panel of the radio. 19 soft rubber, dual-
function keys provide flexible control. There is
an analog meter and digital LCD display, along
with 10 memories.

This particular radio is in need of repair, or it
can be used for parts. It is dead. It does nothing
when turned on. No display, no audio, nothing.

This is the HT only with no accessories for $10

Yaesu VX-7 Reference Manual and Programming cable:

VX-7 Nifty Mini Manual
Has most of the commands that everyone always forgets.
Permits one to have the info close at hand without needing
to carry the entire operating manual. Spiral bound with
laminated pages. Like new. $18

Programming cable
This cable has the threaded connector as used by the VX-7,
but it can also be used on the VX-6, 5, 3, etc. Uses USB port.
It works great with the free "Chirp" program. I have not
tried it with other programs. $18

HT Speaker Microphone:

This HT speaker microphone was made for the
Baofeng UV-3 dual band HTs, but it should fit
many other HTs as well. It has a single 4
conductor connector on it.

This one works fine and is still in its original
box. $8

MFJ-284 HT Speaker Microphone:

This speaker mic has the 3.5 mm and 2.5 mm plugs on
it, as used by Icom, Alinco, Radio Shack, some Yaesu,
and many other HTs.

It works with the following:

YAESU 109, 209, 709, 23, 73, 33, 727 and other YAESU
radios which are pin compatible with the above rigs.

ICOM 2AT, 02AT, 3AT, 03AT, 4AT, 04AT, 12AT, u2A, u2AT,
u4AT and other ICOM radios which are pin compatible
with the above rigs.

ALINCO DJ-560 and other ALINCO radios which are pin c
ompatible with the DJ-560

RADIO SHACK - most

SANTEC ST-20

It works great, and looks like new.

With paper work for $15.

Accessories for the Kenwood TH-21 / 31 / 41 series HTs:

Antenna adapter that fits the TH-21 series HTs, and has
a BNC on the other end. $10

Kenwood SC-8 T "Soft Case" for any of the TH-21 series HTs
great condition $12

Original Operating manual for TH-21 HT for 2 meters $8

Kenwood W09-0315 charger
This charger is used to charge the larger PB-21 H batteries
for the TH-21 series, and also on other Kenwood radios.
It has a standard 2.1 mm coaxial connector. $12

Icom BC-127 A, Battery Charger for Icom IC-Q7A
Dual Band HT:

This charger charges the NiCads or NiMH for the IC-Q7 A
Dual band HT, and Icom R-2 receiver, and probably
others.

This one appears to be new, unused, still in its bag.
Icom lists them at $21.
Buy this one for $10.

HT Belt Clips and Wrist Straps:

Belt Clips:
All include the hardware with the belt clip and are $6 each.
Icom IC-2 AT
Motorola
Yaesu FT-207
Yaesu FT-209

Wrist Straps for various HTs - $4 each
Kenwood TH-215 / 225 / 415, TR-2500, etc.
Kenwood TR-2400
Yaesu FT-209

Antennas for your HT:

All rubber ducks are for 2 meters, are in good
condition, and are $10 each, unless stated otherwise.

BNC - Original Alinco EA0024 - 4 inches long

BNC - Original from Kenwood TH-215, about 5 inches long

BNC Connector about 7 inches long

Type F connector - 6.5 inches long

BNC Stubby for 440 MHz, 3 inches long

Optoelectronics Model 7010.1 Precision Frequency
Counter:

The Opto 7010.1 freq counter is a really deluxe
unit. It operates up to 600 MHz. This particular
model features an extra precision TCXO, guaranteed
at 0.1 ppm. Most of these counters came with a
"standard" TCXO that was 1 ppm.

This unit has three frequency ranges -- 10 hz to
12 MHz, 10 MHz to 50 MHz, and 25 to 600 MHz. It
also has three time base counting periods of .1
second, 1 second, and 10 seconds.
This permits extreme precision!

This unit functions flawlessly, and looks like it
has never been used, other than for my testing of
it. It is in its original box, complete with power
cube, the original manual, the original warranty
card (not filled out), and certificate of calibration.

All of this for only $125.

Crystals for 2 meter ham rigs:

Does anyone have an older two meter ham rig and need crystals?

Maybe I can help. I have some 2 meter crystals available -- both
transmit and receive. Most are in the 146 and 147 MHz band segments,
with very, very few in the 145 MHz segment, and none in the 144 MHz
segment. These are for ham rigs only, and not commercial rigs.

These are all the small HC-25 crystals, like are used in most of the
solid state 2 meter mobiles and HTs. Please e-mail the operating
frequency you need. I have them listed by operating frequency and
rig,and not by actual xtal frequency. Send the frequencies you need
(transmit or receive), and the rig that you have, and I will see if
I can help. I have cross references for the various rigs, so I will
know what you need if you give the rig.

Coax connectors and adapters:

Prices are per connector.
Several of each are available.
Most are unused.

SPECIAL: Buy 5 and take 10% off.
Buy 10 or more and take 20% off.

UHF Right angle 90 degree elbow connector $3

UHF double female "Barrel connector" $3

UHF "Bulkhead Connector" - Double female, as above, but for
mounting thru a window, siding, etc. about 3 inches long $6

UHF "T" connector with two female (SO-239) and one male
(PL-259) connection $5

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

UHF Male to BNC female $5

BNC male for coax cables
standard type $2crimp on type $3

Chassis mount BNC female
square mount (uses 4 screws) $3
screw in type $3

BNC "T", two female and one male $3

I also have many other accessories available such as many
different types of microphones, HTs, HF, VHF and UHF rigs, HF
and VHF/UHF antennas, etc.
Just too many to list here. Please e-mail your requests.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400