[AMRadio] BC610 help

[Bob & Tammy]

On the model F through I BC610 The resistances across pins  1 and 2 is 
1.5 ohms,  across pins 3 and 5 is 120 ohms, across pins 6 and 8 it is 
0.1 ohms Hope this helps it comes from Charlie K4FNY. 73 Bob K4BKC


On Sat, Jan 14, 2012 at 3:54 PM, CL in NC wrote:

> If anybody with a BC610 knows this bit of info, it would be 
> appreciated.  I need to know the primary resistance of T1, the 
> filament and B+ xfmr for the modulator driver section.  I'm getting 
> about 2.5 ohms which does not seem unreasonable, but it is popping the 
> fuse with no loads on the secondary, whose windings seem OK ohmage 
> wise also. You can read it easily at J5 on the back, terminals 1 and 3 
> with the fuse pulled.
>
> Charlie in NC
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: 
> http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html