[AMRadio] diode substitute for 866

[Rick]

I removed the filament winding from the socket and I get a completely open
circuit between pins 1 and 4 when measured with the VOM when I measure
directly at the pins of the diode and when it's in the socket.

Rick / K5IAR

-----Original Message-----
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net] On Behalf Of Bob Macklin
Sent: Wednesday, June 08, 2011 3:42 PM
To: Discussion of AM Radio in the Amateur Service
Subject: Re: [AMRadio] diode substitute for 866

Does your solid state rectifier have connection between pins 1 and 4?

Is this a ceramic socket?

Disconnect both filament leads!

Bob Macklin
K5MYJ