[AMRadio] mercury vapor tubes

Tue Jun 7 17:04:19 EDT 2011

Rick. Operating a MVR in the horizontal position is a real good way to 
test the line fuses
Don't do it.
Gerald D.(Jerry) Stockinger
K9GOZ

On 6/7/2011 3:44 PM, Rick wrote:
> Once a mercury vapor tube (866) has warmed properly is it okay to lay the
> chassis on its side (and apply B+) putting the tube in a horizontal position
> so I can make under chassis measurements?
> Thanks,
> Rick / K5IAR
>
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/[email protected]/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>