[AMRadio] 220 vac line

[Rick]

Thanks everyone. The way I understand the comments I should use the bare
wire for the green (ground) on the 20 amp, 220 VAC outlet I am wiring and
leave the white (neutral) disconnected and capped. Since the ground wire
from the main panel is connected to the ground buss on the sub panel I
should encounter no problems between anything wired to the main panel and
the new sub panel.

Thanks again! Rick / K5IAR

-----Original Message-----
From: amradio-bounces at mailman.qth.net
[mailto:amradio-bounces at mailman.qth.net] On Behalf Of Paul Christensen
Sent: Sunday, July 24, 2011 9:42 PM
To: Discussion of AM Radio in the Amateur Service
Subject: Re: [AMRadio] 220 vac line

> Another 2 cents worth
> I just bought 2 new 220 panels to expand my shop system. Both have the
> neutral and ground buss combined.
> I thought it was weird and/or wrong. Paperwork confirms it is right per
> Square D

You may want... Paul, W9AC