[AMRadio] Dynamotor help

[C.L. Mitchell]

If it still has the original color coded wiring, here are the connctions from the TM:
 
Black = A- brush
White = A+ brush
Green = B- brush
Red = B+ brush
 
Do you have a manual?  If not, I have a pdf version; about 7.5 Mb.
 
Mitch,  K9PNP
 
> Date: Fri, 4 Feb 2011 09:52:21 -0800
> From: mjcal77 at yahoo.com
> To: amradio at mailman.qth.net
> Subject: [AMRadio] Dynamotor help
> 
> I'm returning a BC348 back to dynamotor operation for a friend, and the dynamotor he sent me is not up too snuff. Cleaned out the coagulated grease in the bearings, but also found that somebody else had been working on it and left one connection inside dynamotor housing itself, off. Of course no info I can find shows how the stator wires up, but it looks like it goes to the HV side of the armature, with one wire each from the stator, going to connections on the brush holders. Is this correct?
> 
> Charlie W4MEC in NC
> 
> 
> 
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html