[AMRadio] DX 60 mods

[james.liles]

Bob,
The Ht-40 used a neon indicator for over modulation announcement --- I 
believe it was the K level schematic.  Also, there were numerous audio 
changes made.  Kindest regards Jim K9AXN

----- Original Message ----- 
From: "rbethman" <rbethman at comcast.net>
To: "Discussion of AM Radio in the Amateur Service" 
<amradio at mailman.qth.net>
Sent: Friday, July 02, 2010 5:22 PM
Subject: Re: [AMRadio] DX 60 mods


>  Jim - The HT-40 came out before zeners and leds unless I'm really out
> in left field.
>
> Bill Breshears', WC3K, modification used those components to give an
> over modulation "indicator" to adjust the mic gain with, and allow the
> operator to run with a clean signal.  Circa 1999 - 2002.
>
> Bob - N0DGN
>
> On 7/2/2010 5:55 PM, james.liles wrote:
>> Hi Bob:
>> I believe that over mod detection change originated in the latest version 
>> of
>> the Hallicrafters HT-40.  Look at the latest schematic and you will see 
>> some
>> very effective modulation changes to that radio.
>> Kindest regards Jim K9AXN
>
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html