[AMRadio] DX100B

[Mike Sawyer]

There should be 3 SO-239 connectors: 2 for the SoB-10 and 1 for the antenna. 
There should be and extra switch usually mounted near the lower right hand 
corner of the front panel.
Mod-U-Lator,
Mike(y)
W3SLK
----- Original Message ----- 
From: "CL in NC" <mjcal77 at yahoo.com>
To: <amradio at mailman.qth.net>
Sent: Tuesday, April 28, 2009 12:16 PM
Subject: [AMRadio] DX100B



Does anybody know if the DX100B was planned to be used with a SSB adaptor 
sometime in the future by Heath?  The one I have has a fuse installed to 
power a 12 volt xfmr for the PTT, and it is in a hole that is obviously 
punched by Heath for an SO239.  There is another SO239 installed near the 
normal antenna output, with sheet metal screws, I think some previous owner 
intended to put in an antenna xfr relay.  The schematic I have, which is for 
the DX100, the model with the big cabinet, but the small knobs unlike the 
first DX100, does not show any SSB cabling.

Charlie, W4MEC in NC



______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Post: AMRadio at mailman.qth.net
To unsubscribe, send an email to amradio-request at mailman.qth.net with
the word unsubscribe in the message body.

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html