[AMRadio] Henry Plate Current Meter needed

[Jim Tonne]

Ronnie:

Whoa!  Go slow!  If you remove the meter from the
panel,  you should see on the panel a large hole for
the meter "guts" and four small holes for mounting.

It turns out that lots and lots and lots of meters may
very well fit those holes.  So, as a worst-case
scenario, you get a "new" meter that looks different
from those remaining, you might also consider
replacing all of them if you want them to look like
siblings.

If necessary, use a meter-scale drawing program
such as Meter.exe to rescale the new meters.

- Jim WB6BLD





----- Original Message ----- 
From: "ronnie.hull" <ronnie.hull at glowbugs.com>
To: "Discussion of AM Radio in the Amateur Service" 
<amradio at mailman.qth.net>
Sent: Tuesday, April 07, 2009 5:24 PM
Subject: [AMRadio] Henry Plate Current Meter needed


> well I bought myself a henry 2k desktop that lasted one week :(
>
> I need a plate current meter. This is the OLD style henry with the tear 
> drop
> shaped meters.
>
> Please help me salvage this amp and not have to throw it in the dumpster 
> LOL
>
> Thanks
>
> Ronnie W5SUM
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html