[AMRadio] Need Pole Pig wiring info

[jeremy-ca]

I assume that you want to remove it from the oil to save some weight and 
size.
This is really taxing my memory but I believe the new secondary (was the 
primary) may be a dual winding so you will have to determine if you want a 
FW or a bridge and wire accordingly.

This is going back 40 years or so and Ive no idea if the current style is 
the same as homes are no longer fed with 110 OR 220V.

My first experience with a pole pig was around 1955 at a OT DXer over a few 
streets. He had a fully cased one on the floor behind the rack and used it 
to feed PP VT-127A's on 20CW, the only band/mode he used. Boy did those 
tubes ever get white!

Carl
KM1H



----- Original Message ----- 
From: "Donald R. R Moore" <wa5ffk at juno.com>
To: <amradio at mailman.qth.net>
Cc: <amradio at mailman.qth.net>
Sent: Saturday, November 17, 2007 4:30 PM
Subject: [AMRadio] Need Pole Pig wiring info


>I would like to find a web site that would give me information on
> converting a 5kva pole pig to be used as a
> High Voltage transformer?
> Don
> W5FFK
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>